Residential · Tampa, FL
Titan Mobile Welding Tampa has served Tampa since 2015, providing on-site metal fence repair for homes, HOAs, and commercial properties. We fix broken welds, leaning posts, damaged panels, and gate issues using mobile MIG and stick welding, with clean, durable finishes that match your fence.
A solid repair starts with prep and a stable base. We inspect the full run for cracked welds, bent pickets, failed hinges, loose fasteners, and post movement, then square the panel and set gate gaps before welding. Rust and old paint get removed at the joint with a grinder and flap disc, we bevel thicker steel when needed, and we clamp parts to control heat and alignment. If a post is loose, we can re-set it plumb in concrete, replace a rusted section, or add a steel sleeve and gussets so the repair is structural, not cosmetic.
Florida weather is hard on steel, so we build repairs around corrosion control and water runoff. After welding, we dress sharp edges, seal pinholes, and check for places where water can sit against a post or rail. For wrought iron and steel tube fences we can prime with a rust-inhibitive metal primer, then apply matching topcoat paint, or leave the weld prepped for your painter. When appearance matters, we blend bead profile and texture, match picket spacing, and keep heat distortion minimal on thinner material like 16-11 gauge tubing and flat bar.
Tampa customers choose Titan Mobile Welding Tampa because we show up ready to fix the problem in one trip. Our rig carries MIG and stick welders, shielding gas, grinders, clamps, cutting tools, and steel stock so we can handle everything from a single cracked hinge to multiple panels and posts. You get clear communication on what failed and why, plus options that fit your budget, such as reinforce and re-weld versus replace sections. We work safely around landscaping and pavers, protect nearby surfaces from sparks, and keep gate hardware operating smoothly after the repair.
Before we wrap up, we do a walkthrough with you and operate every gate and latch we touched. We verify post plumb, hinge alignment, latch engagement, and that panels are secure with no sharp edges or loose pickets. You receive a free written estimate up front, then a straightforward invoice that lists what was repaired, what material was added, and what finish was applied. If additional weak points show up during welding, we flag them and explain the next-best fix so you can plan the rest of the fence instead of chasing failures one at a time.
Yes. We provide a free written estimate with scope, materials, and labor after reviewing photos and/or an on-site evaluation.
In most cases, no. Our mobile setup is designed to weld on-site for gates, railings, trailers, frames, brackets, and equipment so you avoid transport and downtime.
Yes. We perform aluminum and stainless work when the project calls for it, commonly using TIG (GTAW) for controlled heat and clean results.
Yes, depending on the application and access. We evaluate base metal condition, joint design, and loading, then recommend a repair or replacement approach that is safe and appropriate.
We can prep and apply rust-inhibitive primer and paint-ready finishing on many jobs. Final coating options depend on the environment, desired finish, and existing coating system.
When a metal fence starts leaning, rattling, or dragging at the gate, the failure is usually at the welds, posts, or hardware, not the entire fence. Titan Mobile Welding Tampa provides on-site metal fence repair for steel and wrought iron fencing, including broken rails, rusted pickets, cracked hinge welds, and storm or vehicle damage. Because we are mobile, most repairs are completed where the fence sits, without hauling panels off-site or waiting on a shop schedule.
Our metal fence repair process focuses on strength first, then appearance. We start by checking the fence line for movement, measuring gate gaps, and finding cracked welds or thin rusted areas. The joint is cleaned to bright metal, parts are clamped square, and we weld using the right process for the material thickness and access, commonly GMAW (MIG) for controlled, clean beads and SMAW (stick) where wind or heavier sections call for it. If a post has shifted, we can re-set it in concrete or reinforce it with a steel sleeve to restore rigidity.
After the structural work is complete, we address corrosion and finish. Welds are dressed as needed, edges are deburred, and we prep the repair for primer and topcoat so it blends with the existing fence. For gates, we confirm smooth swing, proper latch engagement, and that the gate will not drag after the repair. If we see additional weak spots such as rust-through at the bottom rail, loose brackets, or thin hinge plates, we point them out and provide repair options.
If you need dependable metal fence repair in Tampa, Titan Mobile Welding Tampa is ready to help with a fast site visit, a clear written estimate, and workmanship aimed at long-term durability in Florida conditions. Call to schedule an evaluation and get your fence and gates secure again.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Tampa. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
